• Ce sujet est vide.
Vous lisez 25 fils de discussion
  • Auteur
    Messages
    • #33650 Répondre
      ekskursiya phuket 359
      Invité

      пхукет экскурсии экскурсия пхукет

    • #36832 Répondre
      ThomasSaw
      Invité

      wooley booley elvis is alive
      wooley booley elvis is alive
      wooley booley elvis is alive
      wooley booley elvis is alive
      wooley booley elvis is alive
      https://elvises.site/

    • #47408 Répondre
      JamesBluri
      Invité

      If you are looking for where to start with INAV, open the documentation before you touch PID. [url=https://inavflight.net]inavflight.net[/url] has the 9.1 firmware, the Configurator and Getting Started. I would flash the flight controller from there, not from a cut-down copy.

    • #47748 Répondre
      JamesBluri
      Invité

      If you are building a plane or a quad on INAV, skip last year’s write-up. The current line is 9.1, and the Configurator has to match the firmware. The official download and Getting Started are at [url=https://inavflight.net]inavflight.net[/url]. This is the one for navigation, VTOL and wings, not Betaflight.

    • #47837 Répondre
      JamesBluri
      Invité

      No need to hunt INAV firmware mirrors. [url=https://inavflight.net]inavflight.net[/url] has the 9.1 download, the Configurator and the real documentation. That is enough for a first wing or quad.

    • #48106 Répondre
      JamesBluri
      Invité

      GPS has to sit still before the first flight or Loiter is a mess. I used [url=https://ardupilot.club/copter/docs/common-positioning-landing-page.html]GPS/Compass[/url] for the modules and the Mission Planner checks. After a 3D fix the rest of the setup is normal.

    • #48473 Répondre
      JamesBluri
      Invité

      Where do you download Mission Planner now so it matches the firmware? Old forum dumps leave the board half-flashed. I take the ground station from here: [url=https://ardupilot.club/planner/index.html]Mission Planner[/url]. Then I flash Copter or Plane from the same site.

    • #48580 Répondre
      JamesBluri
      Invité

      For a first Copter I would not touch PID until the setup is done. [url=https://ardupilot.club/copter/docs/initial-setup.html]First Time Setup[/url] is the page I followed: firmware, Mission Planner, compass and radio. After that the first flight notes make sense.

    • #48614 Répondre
      krakenblog_zvOl
      Invité

      кракен сайт обзор [url=krakenblogs.info/]кракен сайт обзор[/url] .

    • #48841 Répondre
      JamesBluri
      Invité

      Need the UA download page, not a random mirror. I take the files from [url=https://inavflight.net/zavantazhyty]Завантажити INAV[/url] and then pick the target in Configurator.

    • #48976 Répondre
      krakenblog_ezOl
      Invité

      кракен сайт обзор [url=https://www.krakenblogs.info/ustroystvo-darknet.php]кракен сайт обзор[/url] .

    • #49275 Répondre
      krakenblog_qhOl
      Invité

      kraken onion технология [url=www.krakenblogs.info/istoriya-kraken.php/]kraken onion технология[/url] .

    • #49441 Répondre
      EdwardPenly
      Invité

      Binom plus Domovoy: verdict on my own domain, money into the Binom campaign URL, safe never reaches the stats. Macros and postback are on [url=https://doma.gives/guides/binom-filtr]Binom traffic filter[/url].

    • #49714 Répondre
      EdwardPenly
      Invité

      Bot Fight Mode cuts bots on the CDN but it does not pick money or safe and it writes no reason. When to use which, and when they clash: [url=https://doma.gives/guides/cloudflare-bot-fight-vs]Cloudflare Bot Fight vs server filtering[/url].

    • #49774 Répondre
      EdwardPenly
      Invité

      In Facebook Ads a real tap differs from an ad review check, and fbclid alone is not proof of a live user. The adcheck.destination rule is explained here: [url=https://doma.gives/guides/facebook-ads-fbclid]Facebook Ads fbclid[/url].

    • #49857 Répondre
      trips_zkOl
      Invité

      Трипскан [url=https://trip81.shop/]Трипскан[/url] .

    • #50077 Répondre
      JamesBluri
      Invité

      For Ukraine this is the hub I keep open. Firmware, GPS and the UA guides are linked from [url=https://inavflight.net/ukraine]INAV Ukraine[/url]. I flash from there, not from a zip on a forum.

    • #50166 Répondre
      JamesBluri
      Invité

      GPS has to sit still before the first flight or RTH is a mess. I used [url=https://inavflight.net/gps-setup]GPS setup[/url] for the module and the first 3D fix. After that the rest of the setup is normal.

    • #50258 Répondre
      trips_oiOl
      Invité

      Tripscan 2026 [url=www.trip81.shop/]www.trip81.shop/[/url] .

    • #50424 Répondre
      trips_mdOl
      Invité

      Tripscan [url=trip81.shop]trip81.shop[/url] .

    • #50656 Répondre
      Tripscanvhod_fbOl
      Invité

      Трипскан [url=www.tripscanvhod.com]www.tripscanvhod.com[/url] .

    • #51075 Répondre
      userxrm_uwOl
      Invité

      фишинговые зеркала сайтов [url=krakenssait.cc]фишинговые зеркала сайтов[/url] .

    • #51472 Répondre
      userxrm_wpOl
      Invité

      что такое onion-адрес [url=http://www.krakenssait.cc]что такое onion-адрес[/url] .

    • #51713 Répondre
      Krakensv_dlOl
      Invité

      https krab cc [url=www.kra-vhod.cc/]https krab cc[/url] .

    • #51824 Répondre
      Krakensv_yeOl
      Invité

      кракен вход [url=kra-vhod.cc/]кракен вход[/url] .

    • #51853 Répondre
      Krakensv_enOl
      Invité

      kraken onion ссылка [url=kra-vhod.cc]kraken onion ссылка[/url] .

Vous lisez 25 fils de discussion
Répondre à : Répondre #51075 dans apple river concealment crystal
Vos informations :





<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">

Annuler